|

Listen Up

$139.00
The Listen Up is a small passive expander for the Listen modules that provides stereo 1/4" (6.35mm) jack inputs and outputs. It connects to one or two Listen modules and/or WAV Recorder module with the included 3-pin cables. There are four 1/4" jacks arranged in left/right pairs. The left jack of each pair can be used as a TRS stereo jack if the right jack is unpatched.
Out of stock
  • Manufacturer's warranty
  • Pre-orders ship 1-2 days after arrival in NZ
  • Free NZ/AU shipping on all orders over NZ$299
  • Free worldwide shipping on all orders over USD$499
Specifications
  • Electrical and Mechanical Specifications
  • • 6 HP Eurorack format module
  • • 0.95" (24mm) maximum depth with power cable
  • Power consumption:
  • • Maximum values: All output jacks shorted to ground, 22Vpp signal on all input jacks, knobs at 100%
  • • +12V: 62mA
  • • -12V: 55mA
  • Line to Mod section (top)
  • • Output: 1k impedance
  • • Input: 100k impedance
  • • Frequency Response: +/-0.1dB max deviation, 20Hz 20kHz
  • • Maximum output level: 22V peak-to-peak
  • • Maximum gain: +30dB
  • Mod to Line section (bottom)
  • • Output: 68 impedance
  • • Input: 100k impedance
  • • Frequency Response: +/-0.1dB max deviation, 20Hz 20kHz
  • • Maximum output level: 22V peak-to-peak
  • • Maximum gain: 0dB (unity)
  • Channel cross-talk:
  • • Test conditions: Test signal input into left Mod In jack. Sine wave at frequencies from 20Hz to 20kHz tested. Result given as a ratio of the appearance of test frequency measured on right Line Out jack to left Line Out jack. Test repeated with left and right jacks swapped. Worst-case results for any channel and frequency reported.
  • • 20Hz 20kHz: <-110dB
More Videos

Manufacturer 4MS
Status Pre-order
Functionality Utility, Mixer, I/O Interface
Share it

Other items you may like