4MS Quad Clock Distributor

Four channel voltage controlled Clock Divider/Multiplier with master Tap Tempo. Each channel can be synced to the tap tempo, to the channel above, or to an external clock. Each channel also has a reset jack.
With a Tap Tempo button and five sync'ed clock outputs, the QCD is a versatile head-of-the-chain "Master" clock module, and/or a complex rhythmic pattern generator.

Basic features:

  • Four CV-controlled Clock Divider/Multipliers
  • Tap tempo button and five sync'ed clock outputs make the QCD perfect for head-of-the-chain "Master" clock module 
  • Tap clock output runs at the tapped tempo (even if other channels are being clocked externally) 
  • Create complex rhythmic patterns by patching multiple channels into each other's Div/Mult CV and Reset
  • Each of the four channels has an independent clock IN, OUT, Reset and Div/Mult CV
  • Divide or Multiply incoming clock from /32 to x16 on each channel:
    • Detented knob to snap to integer division/multiples 
    • CV jack to modulate Div/Mult amount 
  • Reset jack (per channel) restarts the clock when a trigger is received (alters phase of clock) 
  • Clock input jacks are normalized downwards: Tap->Red->Black->Blue->Green 
  • Clock outputs stop automatically when incoming clock stops 
  • LEDs blink to output clocks' tempos 
  • 5V clock output pulses, fully buffered. Default is square-wave, and PW is controllable with expander 
  • Daisy chain multiple QCDs or other clock modules using Tap Out jack 
  • Header on the PCB to connect to Quad Pingable LFO (QPLFO) to provide four CV Skew-able, CV Div/Mult-able envelopes 
  • Interfaces with QCD Expander for more features (Pulse Width, Inverted Gate, attenuverters for CV inputs)
In stock
Ships in 1–2 days
  • Manufacturer's warranty
  • Pre-orders ship 1-2 days after arrival in NZ
  • Free NZ/AU shipping on all orders over NZ$299
  • Free worldwide shipping on all orders over USD$499
  • Electrical and Mechanical Specifications
  • • 10 HP Eurorack format module
  • • 16-pin Eurorack power header
  • • 1.0" (26mm) deep
  • Power consumption
  • • A jumper selects using +5V from the power supply, or generating +5V on-board from the +12V rail
  • +12V rail
  • • 48mA with jumper selecting external 5V
  • • 88mA with jumper selecting internal 5V
  • +5V rail
  • • 41mA with jumper selecting external 5V
  • • not used (0mA) with jumper selecting internal 5V
  • -12V rail
  • • 40mA
More Videos

Manufacturer 4MS
Status In stock
Functionality Random source, Utility, Mixer, Clock
Share it

Other items you may like